
1/1
Number of views:
1000
Nonferrous Metals
Category
Nonferrous Metals
Retail price
0.0
元
Market price
0.0
元
Number of views:
1000
Product serial number
Quantity
-
+
Stock:
0
Details
Metal category | Texture of material | Satisfy process | Specification resume | Introduce |
Aluminium alloy | 2A14/2219/5A06/7050/7075 | Blank making + grinding ring |
600~5500 (8800)
|
Aluminum alloy is the most widely used non-ferrous metal structural material in industry, which is widely used in aviation, aerospace, automobile, machinery manufacturing, shipbuilding and aluminum alloy |
Titanium alloy | TA1、Tc4 | Grinding ring | 1000~2700 | Titanium alloy is an alloy composed of titanium and other elements. |
Magnesium alloy | Grinding ring | 800-1000 | Magnesium alloy is an alloy based on magnesium and added with other elements. It is characterized by low density, high specific strength, large specific elastic modulus, good heat dissipation, good shock absorption, greater impact load bearing capacity than aluminum alloy, and good corrosion resistance to organic matter and alkali. | |
Nickel base alloy | Grinding ring | 5500 | Nickel base alloy is a kind of alloy with high strength and certain anti-oxidation and corrosion ability at 650 ~ 1000 ℃. | |
Stainless steel | Grinding ring | 3800 |
Previous
None
Next
None
Related products
Products

Yaw Ring
Yaw ring is a key component in the yaw system of wind turbine and is equivalent to a large sliding bearing. It is located at the bottom of nacelle, the lower end is fixed and connected with wind tower by bolt, the upper end is used to support the entire nacelle mechanism with the help of the sliding surface and its periphery is meshed with four yaw reducer output gears. The yaw motor drives the whole nacelle to rotate slowly, so as to adjust the direction of wind turbine impellers.

Flange
The flange is welded on the wind tower sections to connect tower sections and tower foundation. Compare to other flanges, Wind tower flange has larger diameter. A wind turbine flange is the key connection, support and stress parts of wind tower, and is an important component of wind turbine.

Pitch Bearing
Pitch bearing is the component which is for changing the angle of wind turbine blades.
The function of the pitch system is to change the angle of attack of airflow to blades by adjusting the pitch of blades when the wind speed is too high or too low, so as to further change the aerodynamic torque obtained by the wind turbine generator and keep the power output stable.
Messages
WRITE A MESSAGE TO US
客户留言
描述:
Contact
E-mail:
Flange BU:sales-e@sinhomcn.com
Bearing BU:sales-d10@sinhomcn.com
Non-Ferrous BU: sales-d6@sinhomcn.com
Sales Center:sales-x@sinhomcn.com
Customer Service:marketing@sinhomcn.com
Add:
No. 2, Haisheng street, Dalian Economic and Technological Development Zone
Scan attention

Copyright © 2021 Sinhom Manufacturing Equipment Co., Ltd. All rights reserved 辽ICP备2021007590号-1