To promote the harmonious coexistence between man and nature,
and to devote all our strength to environmental protection
Promote the harmonious coexistence of Human And NatureDevote all efforts to the cause of environmental protection
Copyright © Dalian heavy forging 辽ICP备******号
请拖入内容到容器
ABOUT SINHOM
Sinhom Manufacturing Equipment Co., Ltd.
•Formerly known as Dalian Heavy Forging Co., Ltd, DHF was established in 2014 and officially renamed as SINHOM in July 2022. It has total investment of more than 1.3 billion RMB and area of nearly 130,000 square meters;
•SINHOM is mainly engaged in design and manufacture of large forged products (rings in bucket shape, disc shape), precision bearings and special bearings;
•Currently SINHOM has 2 major production bases in Dalian and Tianjin, and the 3rd production base in Penglai, Shandong Province is under planning;
•The annual production capacity is over 200,000 Tons and the diameter of forged ring ranges from 0.6m~10m;
请拖入内容到容器
PRODUCT CENTER
-
Yaw RingYaw ring is a key component in the yaw system of wind turbine and is equivalent to a large sliding bearing. It is located at the bottom of nacelle, the lower end is fixed and connected with wind tower by bolt, the upper end is used to support the entire nacelle mechanism with the help of the sliding surface and its periphery is meshed with four yaw reducer output gears. The yaw motor drives the whole nacelle to rotate slowly, so as to adjust the direction of wind turbine impellers.Yaw Ring0.00Yaw ring is a key component in the yaw system of wind turbine and is equivalent to a large sliding bearing. It is located at the bottom of nacelle, the lower end is fixed and connected with wind tower by bolt, the upper end is used to support the entire nacelle mechanism with the help of the sliding surface and its periphery is meshed with four yaw reducer output gears. The yaw motor drives the whole nacelle to rotate slowly, so as to adjust the direction of wind turbine impellers. -
FlangeThe flange is welded on the wind tower sections to connect tower sections and tower foundation. Compare to other flanges, Wind tower flange has larger diameter. A wind turbine flange is the key connection, support and stress parts of wind tower, and is an important component of wind turbine.Flange0.00The flange is welded on the wind tower sections to connect tower sections and tower foundation. Compare to other flanges, Wind tower flange has larger diameter. A wind turbine flange is the key connection, support and stress parts of wind tower, and is an important component of wind turbine. -
Pitch BearingPitch bearing is the component which is for changing the angle of wind turbine blades. The function of the pitch system is to change the angle of attack of airflow to blades by adjusting the pitch of blades when the wind speed is too high or too low, so as to further change the aerodynamic torque obtained by the wind turbine generator and keep the power output stable.Pitch Bearing0.00Pitch bearing is the component which is for changing the angle of wind turbine blades. The function of the pitch system is to change the angle of attack of airflow to blades by adjusting the pitch of blades when the wind speed is too high or too low, so as to further change the aerodynamic torque obtained by the wind turbine generator and keep the power output stable.
请拖入内容到容器
PROJECT DISTRIBUTION
-
㎡
Plant area
-
T/A
Throughput
-
people
Staff
-
term
Patent
请拖入内容到容器
NEWS
CENTER
Wind energy CEOs called on the G20 to take renewable energy seriously
2021-08-27
National power industry statistics from January to July
2021-08-27
Vietnam's offshore wind power is at a crossroads. The next transition phase requires clear policies
2021-08-27
请拖入内容到容器
请拖入内容到容器
CONTACT SINHOM
Flange BU：sales-e@sinhomcn.com
Bearing BU：sales-d10@sinhomcn.com
Non-Ferrous BU: sales-d6@sinhomcn.com
Sales Center：sales-x@sinhomcn.com
Customer Service：marketing@sinhomcn.com
0411-39255365
请拖入内容到容器